Volkswagen Key Programming Tips
Volkswagen provides a convenient method to get an additional key or replace one that stopped working. The process is simple and inexpensive with some tips.
First, find the right key fob. It should have a keyblade that is able to be turned upside down or mounted internally in the keyfob. Get all the documentation you need to prove ownership. Then, visit the locksmith or dealer.
Immobilizer
The immobilizer feature is an anti-theft device that blocks unauthorized or Volkswagen Key Programming damaged keys from being able to start the vehicle. The system recognizes a specific chip on each key. A VW dealer or a locksmith for cars can program additional keys, however the process requires special software and tools. The right tools are crucial for a smooth experience. Technicians should try to reproduce the issue before beginning the key programming. They should also look over the vehicle for fault codes, look for technical service bulletins (TSBs), and test the battery inside the key fob.
Volkswagen keys that are not programmed with immobilizer chips will stop the engine after a short period of cranking. It doesn’t stop the alarm from going off or opening doors. The immobilizer on the key fob is a separate part that is glued to the metal flip side of the car keys. It must be programmed into the car’s computer in order to work.
A new key added to a VW is more expensive than creating a duplicate key in the event that all the original keys are lost. The key has to be purchased from the manufacturer and undergo an specialized programming process to connect with the computer in the vehicle. It can be done with the help of a professional and software tool like VagTacho or VCDS. This procedure is advised for vehicles with the older Immobilizer 2, and older.
Electronic Ignition
Electronic ignition on a key is a vital component of a car’s anti-theft feature. The feature is activated when the key fob is put in the ignition. However, it’s not foolproof. It is susceptible to failure, which can result in the engine of your VW not starting. This could be due to a variety of causes, including incorrect key programming or a defective car battery.
Fortunately, you can avoid this problem by getting your Volkswagen car key fobs programmed professionally. This can be done by a dealer, or an locksmith. The costs for this service are different, but are usually between $90 and $150. The prices will also vary based on the model of your vehicle and year.
You will need your primary key to program the new VW key fob. The new key must be able start the vehicle. This will allow onboard diagnostics to recognize it as an authorized key. Then, the immobilizer warning light will be turned off.
Some models require a three- to four-digit PIN code to allow onboard key programming. Others may require a scan tool to do so. A dealer or locksmith may use a scanner to program keys onboard. These tools aren’t for sale at general automobile accessory stores, so you’ll have to purchase one or borrow it from a dealership.
Keyless Entry
If your Volkswagen key fob is having problems with its battery, or you’ve lost it altogether, it’s likely that the car will start, but will not unlock. This problem is easy to fix. First, make sure that the key fob is seen by the vehicle. If so, hold down the button to lock for a period of six seconds until lights flash on the key.
The key fob will be reset to the nearest point to your VW. After this you should be able to unlock your vehicle by pressing the unlock button on the fob’s key again. If the car still doesn’t unlock, you’ll have to seek out a dealer to get the key programmed.
The cost of programming a brand new Volkswagen Key could be costly. It is recommended to get quotes from several dealers prior to selecting the one that is right for you. Make sure to ask if the dealer is going to charge you for both the key and the programming.
Making a second Volkswagen key is a good idea for many reasons. You might need a backup in case of theft or if you lose your primary key. Here are some steps to follow if your have a spare Volkswagen key and want to program it to work with your Volkswagen.
Remote Start
The remote-start systems of Volkswagen are different from earlier generations of key fobs which communicated using radio waves. Instead they connect to your car using a secure wireless connection using cellular technology. This means that your VW Atlas, Jetta, or Passat is able to sense when you’re within range and can activate features such as push-button start or keyless entry. It’s as easy as opening the app and connecting your phone to your car and pressing the button.
Be certain that your Volkswagen is parked, and the driver’s side door is shut. This will ensure that only the right key is used to access the features of your car. If the key is not recognized the dashboard will display an error message. In addition, this method will only work on newer VW models that have an RFID sensor ring on the steering column. These models require a secret pin number to be programmed.
To program the new key fob, close the door to the driver’s compartment and take off the key fob that is the primary one. Next, press the lock button on the new key fob. This will notify the vehicle that it’s a working key. The key will start sending signals that allow you to open your driver’s side door and also start your car remotely. Some have reported that this only works if there is a clear line of view to the car, however others have succeeded even in congested parking lots.
